Electric fencing provides a physical deterrent, a monitored perimeter line and an early warning system for commercial, industrial and high-security sites. Correctly specified, it can form an important part of a wider security strategy.
Explore the complete range of Nemtek electric fencing systems, energisers, monitoring equipment and accessories.
The Druid 25LCD is designed for larger and more complex electric fencing systems that require two independently powered and monitored zones. Its LCD display provides clear visibility of fence status, voltage levels and system conditions, helping installers and security teams identify faults quickly. It can also connect with gate inputs, armed-response systems, GSM communication and wider security networks.
The Druid 20LCD is a low-voltage fence monitor designed for public-access areas where an electric shock would be unsuitable. It monitors fence continuity using safe 50V pulses and creates an alarm if the wires are cut, shorted or tampered with. It can operate with Druid 25LCD and 28LCD energisers, connect to armed-response or GSM systems and integrate with Nemtek Connect.
Remote control and live status from any iOS or Android device.
Browser-based monitoring for multi-site operations.
Detects cut, climb or short-circuit attempts in real time.
A full range of perimeter, wall-top, taut-wire and gate systems specified around the site, security level and monitoring requirements of your project
A versatile retrofit electric fencing system that uses the mechanical strength and structure of an existing fence. This reduces the time and cost involved in constructing a completely new perimeter. Different Omega profiles can be used for intermediate runs, corners, end-tensioning positions and gates.
Best suited to: Existing mesh, palisade and commercial security fences.
A cost-effective retrofit solution for adding an electric security barrier to a structurally suitable existing fence. Alpha supports are available for intermediate positions, corners, ends and gates, with options for inland and coastal environments.
Best suited to: Commercial sites requiring a practical, economical perimeter upgrade.
A wall-mounted electric fencing system that creates an additional physical and monitored barrier above an existing perimeter wall. The level of protection can be adapted through the choice of support, number of fence wires, bracket height, angle and spacing.
Best suited to: Residential, commercial and high-security perimeter walls.
A patented modular system offering flexibility over fence height, wire quantity and insulator positioning. Two-way sections are generally used for intermediate positions, while three-way sections can form corners, end-tensioning posts, changes in wire direction and inline strain points.
Best suited to: Bespoke wall-top and perimeter installations requiring a highly configurable design.
A monitored perimeter detection system that measures changes in fence-wire tension and generates an alarm if the wires are cut or parted during an attempted entry. Each tension sensor can monitor a straight wire span of up to 100 metres and the system can be combined with an electric fence to create both a detecting and deterring barrier.
Best suited to: High-security sites requiring accurate physical intrusion detection.
The patented Nemtek Dual Action Tension Sensor detects changes in fence-wire tension and uses the electric fence monitoring circuit to create an alarm. It can detect an open circuit at its first-stage trigger and a dead short at its second-stage trigger. DATS2 is intended for lighter wall-top wire, while DATS3 supports heavier freestanding fence wire.
Best suited to: New or existing electric fences requiring enhanced cut, tension and tamper detection.
An alarm-triggered lighting system installed along the electric fence line. When an energiser alarm is activated, the LED lights illuminate the affected perimeter area to assist detection, deter intruders and improve CCTV performance in low-light conditions. The downward-facing lights also help minimise unnecessary light pollution.
Best suited to: Commercial, industrial and high-security perimeters requiring visual alarm confirmation.
A coordinated system for maintaining electric-fence continuity and detecting interference at sliding or swing gates. The system can include two-way or three-way gate contacts, locator plates and heavy-duty mounting brackets selected according to the gate design and monitoring requirements.
Best suited to: Sliding and swing gates forming part of a monitored electric perimeter.
Complete each electric fencing system with compatible safety, control, protection and alarm accessories from the Nemtek range.
Double-sided safety signs with quick-fit clips for secure installation along the fence line.
Fence-mounted indicators that use the flashing frequency to provide a visible indication of fence voltage.
Allow sections of the fence to be isolated for maintenance and easier fault-finding.
Visual alarm and system-status indicators for use alongside the energiser and monitoring equipment.
Protective components designed to divert voltage spikes caused by lightning away from the system.
Audible alarm options and control tags for switching, resetting and operating compatible Nemtek energisers.
